SotaramAFL community mock draft

20 October 2026 mock draft archive

Source stream: 20 October 2026 · Original article: 23 October 2026 · Archived: 17 November 2026

Compare the 20 picks from our 2026 AFL community mock draft, read the club-by-club reasoning and test a different outcome in the simulator.

Want to test a different board? Use the AFL Mock Draft Simulator to make your own selections. The simulator overview explains the starting point, and the walkthrough covers picks, bids and saving a version.

See the 20 picks ↓Make your own draft ↗

NATIONAL DRAFT20 PICKS · LIVE SCENARIOS
Archived edition — 20 completed selections.

The picks and experiments below belong to October. Read the current written AFL mock draft →

THE LIVESTREAM DRAFT · 20 OCTOBER 2026

The community’s 20-pick AFL mock draft

Twenty picks. Several ways to change the board. This community AFL mock draft brings together the final selections from the 20 October livestream, with the trade and bidding alternatives explored along the way. Follow each player into their scouting profile, watch the original discussion, or take a different view into the simulator.

Read the scenario, then make it your own.

This is a recap of a simulator scenario built with live-chat suggestions, not an official draft order or a single settled phantom draft. Pick numbers, trades and matching outcomes refer to the stream’s saved setup. Earlier experiments are kept separate from the final 20-pick board; club holdings and rule settings in the app may since have changed.

2026 AFL mock draft: picks 1–20

Final board from the 20 October 2026 stream. Select a pick number for its notes or a player name for their profile.
PickClubPlayerSelection
1Port AdelaideDougie CochraneMatched academy bid
2CarltonCody WalkerMatched father-son bid
3EssendonEthan DreverOpen selection
4RichmondHarry Van HattumOpen selection
5West CoastArki ButlerOpen selection
6MelbourneMitch HarrisOpen selection
7RichmondHeath MellodyOpen selection
8Greater Western SydneyEthan MatthewsMatched academy bid
9SydneyClancy SnellOpen selection
10BrisbaneCaylen MurrayMatched academy bid
11Gold CoastGus TeixeiraOpen selection
12St KildaSam GayferOpen selection
13CollingwoodKodah EdwardsOpen selection
14MelbourneWill MaladyOpen selection
15St KildaTyson BradleyOpen selection
16EssendonJack PickettOpen selection
17AdelaideJake EimeOpen selection
18FremantleJake SoutarOpen selection
19Greater Western SydneyLeo SteedOpen selection
20EssendonMarlon NeocleousOpen selection

Who would your club take?

Run your own AFL mock draft, choose a different player or test a pick trade. Your choices can produce a different board from the livestream.

Make your own AFL mock draft ↗Check a bid’s cost →

How the selections unfolded

The notes below recap the discussion and completed board. They distinguish selections made by SotaramAFL or suggested in chat from confirmed club intentions.

1
Port Adelaide
Matched academy bid

Dougie Cochrane

Utility

The final run opened with a matched bid for Cochrane. That kept the Port-tied prospect at the Power and moved the remaining clubs through a revised order. The stream also tested how Port’s matching cost changed when Cochrane was called later.

2
Carlton
Matched father-son bid

Cody Walker

Midfielder

Carlton secured Walker in the final run after the stream explored ways to improve its matching position. This is a different outcome from the earlier experiment in which a pick-one bid sent Walker to Essendon. The price and timing of a pick trade were the key questions.

3
Essendon
Open selection

Ethan Drever

Midfielder

After the two matched bids, Drever was Essendon’s first open selection on the final board. The later discussion returned to the Bombers’ developing midfield group before adding a forward with their next selection.

4
Richmond
Open selection

Harry Van Hattum

Ruck/Key Forward

The approach discussed for Richmond was to secure Van Hattum first, then take a midfielder with the next opportunity. SotaramAFL preferred locking in the ruck/key-forward option rather than hoping he would still be available later.

5
West Coast
Open selection

Arki Butler

Forward/Midfielder

West Coast took Butler in the final run, with SotaramAFL explicitly choosing him ahead of Mellody at this point. It was a change from the earlier experiment with Drever at the Eagles, showing how one different preference changes the options for the next club.

6
Melbourne
Open selection

Mitch Harris

Key Defender

Harris was Melbourne’s early selection in the final scenario. By the time Sydney’s choice arrived, the stream noted that Harris had already gone to the Demons, prompting a different option for the Swans.

7
Richmond
Open selection

Heath Mellody

Midfielder / Defender

Mellody followed Van Hattum in Richmond’s haul. On this board, the Tigers secured the ruck/key-forward first and still had Mellody available with their next selection. The pair shows the outcome of the order-of-priorities discussion.

8
Greater Western Sydney
Matched academy bid

Ethan Matthews

Defender/Midfielder

Sydney considered the local academy prospect and GWS matched the bid. Matthews stayed with the Giants, leaving Sydney to make another selection. The stream contrasted this with an earlier Matthews bid in a separate scenario.

9
Sydney
Open selection

Clancy Snell

Tall Utility

With Harris already at Melbourne and the Matthews bid matched, the discussion moved to Snell. He became Sydney’s selection on the final board, illustrating how a club’s next option matters when its initial target is unavailable.

10
Brisbane
Matched academy bid

Caylen Murray

Midfielder

Gold Coast looked at Brisbane’s tied prospect and the Lions matched. Murray stayed with Brisbane at pick 10 in the run, while Gold Coast retained the next open selection.

11
Gold Coast
Open selection

Gus Teixeira

Midfielder/Forward

After Brisbane matched the Murray bid, Gold Coast selected Teixeira. SotaramAFL welcomed the player remaining available at this stage; the bid ahead of this pick changed the number on the board without taking away the Suns’ open selection.

12
St Kilda
Open selection

Sam Gayfer

Key Forward

Gayfer was the first St Kilda selection. SotaramAFL’s stated priority was more key-forward support, making this a role-led choice before the Saints returned for their second pick.

13
Collingwood
Open selection

Kodah Edwards

Midfielder

The Collingwood discussion focused on adding young midfield help. Edwards was the eventual choice after considering the list’s next generation, with the pick going into the midfield rather than another small-forward option.

14
Melbourne
Open selection

Will Malady

Tall Forward

The final results board shows Malady as Melbourne’s second selection. Paired with Harris at pick 6, that gave the Demons a tall forward and a key defender in this run. This is the completed on-screen outcome after the live discussion.

15
St Kilda
Open selection

Tyson Bradley

Key Defender

The Saints’ second choice was revised after the chat raised Bradley. SotaramAFL went back and selected the key defender, pairing him with Gayfer rather than keeping the earlier idea of another pressure-forward option.

16
Essendon
Open selection

Jack Pickett

Forward

A chat suggestion put Pickett into the Bombers’ next slot. The discussion centred on a key-forward partner for Nate Caddy, adding a different role after the earlier Drever selection.

17
Adelaide
Open selection

Jake Eime

Forward/Midfielder

The Adelaide discussion turned to South Australian options before settling on Eime. He was the Crows’ selection shown on the final board, with the stream working through the club’s available options rather than claiming a confirmed club preference.

18
Fremantle
Open selection

Jake Soutar

Key Defender

Fremantle’s discussion focused on ready-made defensive cover for Alex Pearce. After searching for the player’s name with help from the chat, Soutar was the selection shown on the completed board.

19
Greater Western Sydney
Open selection

Leo Steed

Midfielder/Forward

The final board paired Steed with the earlier matched Matthews bid for GWS. This was the Giants’ additional open selection near the end of the first round, before the stream moved to the compensation checklist.

20
Essendon
Open selection

Marlon Neocleous

Midfielder / Forward

Neocleous was the final selection shown in the stream’s top 20. The chat raised him and George Dimer as options; the completed board shows Neocleous joining Drever and Pickett in Essendon’s haul.

Five alternative trade and bidding scenarios

The stream reset the board several times. These experiments are alternatives to the final 20 picks above, rather than extra trades in the same draft.

Alternative 1 · 15:20

What if Essendon bids on Cody Walker at pick 1?

A viewer proposed sending Port’s pick 7 to Essendon for pick 25 and Geelong future first- and second-round selections. In that hypothetical setup, Essendon called Walker first and Carlton could not match; Walker went to the Bombers. Port then matched a later Cochrane bid with a deficit in the demonstrated run.

What to take into your own draft: The bidder’s player choice and the matching club’s usable pick hand both matter. This was a scenario input, not reporting of an agreement between clubs.

Watch this scenario ↗
Alternative 2 · 23:06

Could Carlton trade up enough to protect Walker?

The next experiment moved Carlton’s picks 13 and 18 towards Port’s 7 and 12. Additional future value was discussed as the cost of improving the hand. With the stronger package in that run, Carlton could match Walker at pick 1 and Port could still match Cochrane.

What to take into your own draft: The exercise tested whether the stronger hand could cover a bid. It did not establish a final agreed trade price or a prediction that the clubs would make that deal.

Watch this scenario ↗
Alternative 3 · 28:27

What changes if Matthews is called before Cochrane?

The stream then tested Ethan Matthews at pick 2 and Dougie Cochrane at pick 3. GWS matched Matthews with a small deficit in that setup; Port matched Cochrane without a deficit. This was an alternative bid order, separate from the final top-20 board.

What to take into your own draft: Compare the whole sequence of bids. Moving a tied player down the board changes the matching cost and which selections remain available.

Watch this scenario ↗
Alternative 4 · 30:18

Could Adelaide help Carlton cover a pick-2 Walker bid?

After a Cochrane bid at pick 1, the simulator showed Carlton short of the required matching position for Walker at pick 2. One tested exchange was Adelaide’s live picks 14 and 37 for Carlton’s 17 and 33. SotaramAFL demonstrated that the improved package covered the gap in that run.

What to take into your own draft: These were live pick numbers after the earlier bid had reshaped the board. They should not be read as unchanged pre-draft holdings.

Watch this scenario ↗
Alternative 5 · 40:21

Why a one-place Port pick swap did not solve the problem

The proposed small swap with Port was revisited and corrected on stream. Port’s picks were consumed by the Cochrane match, so the apparent improvement did not leave Carlton with the extra matching value expected afterwards. SotaramAFL then tested moving up two places with St Kilda instead.

What to take into your own draft: Check the hand after a bid is matched. A trade that looks helpful before the match can leave the same effective problem once picks are consumed and the board moves.

Watch this scenario ↗

Watch the source and join the next draft

This page is based on AFL MOCK DRAFT LIVE! You Choose The Picks!, streamed by SotaramAFL on 20 October 2026. Use the timestamps to check an individual decision or watch the full stream to follow the live-chat contributions and revisions.

Watch the full mock draft ↗Find the next live draft ↗

Is this a prediction of the official 2026 AFL Draft?

It is a community mock draft built to explore possibilities. SotaramAFL and chat tried different choices, revised some picks and tested hypothetical deals. The published board records the final 20 shown in this stream.

Why do the pick numbers move when a bid is matched?

A matching club uses selections from its hand, which changes the remaining order. The stream’s trade-timing example shows why a proposed swap should be checked again after those selections are consumed. Read the points and bidding guide or test the club’s hand in the bid-matching calculator.

Can I recreate this exact saved draft?

The stream used its own scenario and the data available that night. The app’s current player pool, starting pick ownership or rules may differ. Open the simulator, review those settings and build your own version; the link does not automatically load the livestream save.

Article updated 23 October 2026 · Source stream: 20 October 2026 · SotaramAFL and live-chat selections · Send a correction

2026 AFL mock draft questions

What is this 2026 AFL mock draft based on?

These are the final 20 selections from the SotaramAFL community livestream on 20 October 2026. Each pick links to its scouting profile and the original discussion. They are a completed simulator scenario, rather than confirmed AFL club intentions.

Where can I see the 2026 AFL draft order?

The 2026 AFL draft order shows the dated starting picks. This mock draft shows the outcome after the stream’s trades, selections and matched bids; the two boards answer different questions.

Can I change the picks and make my own mock draft?

Open the 2026 AFL Mock Draft Simulator to choose players, explore pick trades and test father-son or academy bids. The simulator walkthrough explains how to start.

Which players are available?

Browse every player in the current simulator pool, with roles, scouting reports and projected ranges. Check a club’s draft hand and the bid-matching calculator before testing a scenario.

Club-pick reference: 19 October 2026. Browse the dated post-trade club pick snapshots, read prospect scouting profiles and compare points below. Club holdings can change through further pick trades; scouting ranges are editorial assessments.

Your first AFL mock draft

Set the order, make selections, compare scenarios and keep your draft.

Read guide →

Draft points & bid matching

Understand the 2026 rules, then work through a points example.

Read guide →

Club needs & trade scenarios

Compare the cost of moving up with the players you might miss.

Read guide →

Read a prospect profile as a set of questions

A height, position and comparison name can help you picture a player, but they do not settle where that player should be selected. Read the scouting description for the role being described. Is the player creating chances, finishing them, defending space, or winning the ball at the contest? Which of those skills matters for the club you are drafting for?

Use the same questions for competing prospects. A projection about development should be treated differently from a recorded measurement. A comparison with an established player describes a style; it is not a prediction that the prospect will produce the same career.

Build a shortlist with an alternative

Choose a preferred prospect for a club's next selection, then name a second option before drafting. Run the board to that pick. If your preferred option is gone, the alternative lets you assess the opportunity you actually have rather than restarting until the board gives you the outcome you wanted.

This approach is particularly helpful when a bid changes the order. A club might still secure its tied prospect, but spend picks it had intended to use elsewhere. Compare its whole draft haul rather than judging the night from one selection.

Why 2026 needs its own bidding assumptions

The AFL announced changes to bidding and compensation for 2026. Older examples may use different pricing and matching arrangements. Start with the AFL's official player-movement announcement, then use our points and bid-matching walkthrough to connect the rules to a simulator decision.

The app supports custom rules as well as draft-class defaults. Before sharing a result, say which settings you used and whether you changed the starting order. That gives other fans a way to reproduce the discussion.

A three-scenario plan

  1. Baseline: use the current setup and draft according to your player preferences.
  2. Needs first: keep the setup but prioritise the roles you identified in the club list.
  3. Trade variation: return to the baseline and change one pick package, then compare who remains available.

Look for a decision that changes across the three versions. That is a useful point to investigate: whether the trade is worth its cost, whether a role has enough depth in the pool, or whether a bid leaves the club too little flexibility.

Where to check confirmed information

Use AFL.com.au's draft coverage and official club announcements for confirmed selections and developments. SotaramAFL's automated news wire links to original reporting but is not an official register. Report an outdated profile or pick with the relevant source through the contact page.

Open Mock Draft Simulator ↗Browse all guides

Explore the 2026 draft

Explore more draft questions